run show dhcp server binding address
- Tracy Yang
The run show dhcp server binding address command shows the allocated IP address binding information.
Command Syntax
run show dhcp server binding [vrf <vrf-name>] [address <ipv4-address>]
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. Note that: The command shows the allocated IP address binding information in the default VRF if not explicitly specify a VRF name. |
address <ipv4-address> | Optional. Specifies an allocated address. The value is in dotted decimal notation. |
Example
- View the allocated IP address binding information.
admin@Xorplus# run show dhcp server binding 2 bound clients            IP address     MAC address        Server    Interface 10.1.1.89      00:0a:12:00:12:12   10.1.1.1   vlan100 10.1.1.88      00:0a:12:00:12:34   10.1.1.1   vlan100 admin@Xorplus# run show dhcp server binding vrf vrf1 1 bound clients IP address     MAC address        Server   Interface 10.1.1.89      00:0a:12:00:12:12   10.1.1.1  vlan100 admin@Xorplus# run show dhcp server binding address 10.1.1.89 IP address     MAC address        Server   Interface 10.1.1.89      00:0a:12:00:12:12   10.1.1.1  vlan100 admin@Xorplus# run show dhcp server binding vrf vrf1 address 10.1.1.89 IP address     MAC address        Server   Interface 10.1.1.89      00:0a:12:00:12:12   10.1.1.1  vlan100
In the show result, "Server" represents the IP address of the Layer 3 VLAN interface connected to the DHCP client.
Copyright © 2024 Pica8 Inc. All Rights Reserved.