run show arp inspection interface
The run show arp inspection interface command displays the trust state of all the interfaces for ARP inspection.
Command Syntax
run show arp inspection interface
Parameter
None.
Example
- Display the trust state of all the interfaces for ARP inspection.
admin@Xorplus# run show arp inspection interface Interface Trust State ---------- ----------- ge-1/1/1 Untrusted ge-1/1/2 Trusted ... ge-1/1/47 Untrusted ge-1/1/48 Untrusted te-1/1/1 Untrusted te-1/1/2 Untrusted
Table 1Â Description of the run show arp inspection interface command output
Item | Description |
Interface | Indicates the interface name. |
Trust State | Indicates the trust state of all the interfaces for ARP inspection. The value could be Untrusted or Trusted. The value is Trusted if the interface has been configured as trust port by using the command set protocols arp inspection trust-port <port-name>. Else, it prints Untrusted. |
Copyright © 2024 Pica8 Inc. All Rights Reserved.