set protocols ospf6 interface bfd

Owned by Tracy Yang
Nov 13, 2023

Run the command set protocols ospf6 interface bfd to enable BFD for OSPFv3 on the L3 interface.

Run the command delete protocols ospf6 interface bfd to remove this configuration.


Command Syntax

set protocols ospf6 interface <interface-name> bfd [profile <profile-name>]

delete protocols ospf6 interface <interface-name> bfd [profile <profile-name>]


Parameter

Parameter

Description

interface <interface-name>

Specifies the VLAN interface name, the loopback interface name, the routed interface or the sub-interface name.

profile <profile-name>

Optional. Specifies the profile name. The value is a string. It has to be pre-defined by the command set protocols bfd profile xx. 

Profile can be used to modify parameters for BFD session. 

Example

  •  Enable BFD for OSPFv3 on the VLAN interface.
admin@XorPlus# set protocols ospf6 interface vlan200
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.