set protocols bgp bfd

The set protocols bgp bfd command enables BFD for BGP.
The delete protocols bgp bfd command disables this feature.

Command Syntax

set protocols bgp [vrf <vrf-name>] {neighbor <ip>| peer-group <peer-group> |interface <interface>} bfd [profile <profile-name>]

Parameter

Parameter	Description
vrf <vrf-name>	Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
neighbor <ip>	Specifies the IP address of a peer.
peer-group <peer-group>	Specifies a peer group.
interface <interface>	Specifies an L3 interface for BGP connection. The value could be a VLAN interface name, loopback interface name, routed interface or sub-interface name.
profile <profile-name>	Optional. Specifies the profile name. The value is a string. It has to be pre-defined by the command set protocols bfd profile xx. Profile can be used to modify parameters for a BFD session.

Example
• Enable BFD for BGP.

admin@XorPlus# set protocols bgp neighbor 2.2.2.2 bfd
admin@XorPlus# commit