run show bfd peers
The run show bfd peers command displays informations about all the BFD sessions.
Command Syntax
run show bfd [vrf <vrf-name>] peers [brief | counters]
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
[brief | counters] | Optional.
|
Example
• Show information about all the BFD session.
admin@Xorplus# run show bfd peers BFD Peers: peer 3.3.3.3 local-address 3.3.3.2 vrf vrf1 interface vlan100 ID: 984327 Remote ID: 0 Passive mode Status: shutdown Diagnostics: ok Remote diagnostics: ok Peer Type: configured Local timers: Detect-multiplier: 20 Receive interval: 50ms Transmission interval: 50ms Echo receive interval: 30ms Echo transmission interval: 30ms Remote timers: Detect-multiplier: 3 Receive interval: 1000ms Transmission interval: 1000ms Echo receive interval: disabled peer 3.3.3.3 local-address 3.3.3.2 vrf default interface vlan3 ID: 3820553826 Remote ID: 0 Passive mode Status: shutdown Diagnostics: ok Remote diagnostics: ok Peer Type: configured Local timers: Detect-multiplier: 2 Receive interval: 50ms Transmission interval: 50ms Echo receive interval: 10ms Echo transmission interval: 10ms Remote timers: Detect-multiplier: 3 Receive interval: 1000ms Transmission interval: 1000ms Echo receive interval: disabled peer 2.2.2.2 multihop local-address 2.2.2.3 vrf vrf1 ID: 219448436 Remote ID: 0 Active mode Minimum TTL: 254 Status: down Downtime: 1 hour(s), 53 minute(s), 4 second(s) Diagnostics: ok Remote diagnostics: ok Peer Type: configured Local timers: Detect-multiplier: 3 Receive interval: 300ms Transmission interval: 300ms Echo receive interval: 50ms Echo transmission interval: disabled Remote timers: Detect-multiplier: 3 Receive interval: 1000ms Transmission interval: 1000ms Echo receive interval: disabled
Copyright © 2024 Pica8 Inc. All Rights Reserved.