set protocols bfd multihop peer local-address

Owned by Tracy Yang
Nov 13, 2023
1 min read


The set protocols bfd multihop peer local-address command creates a multi-hop BFD session and specifies the peer IP address.

The delete protocols bfd multihop peer local-address command deletes the multi-hop BFD session.


Command Syntax

set protocols bfd multihop [vrf <vrf-name>] peer <peer-ip> [local-address <local-ip>]


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

peer <peer-ip>Specifies the peer for a BFD session. The value is an IPv4 or IPv6 address.
local-address <local-ip>

Optional. Specifies a local address used to send the packets. The value is an IPv4 or IPv6 address.

Note: This option is mandatory for IPv6.


Example

  • Create a multi-hop BFD session to the peer IP address 2.2.2.2.

admin@Xorplus# set protocols bfd multihop peer 2.2.2.2 local-address 2.2.2.3
admin@Xorplus# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.