run show arp inspection access-list

The run show arp inspection access-list command displays the binding entries and applied VLANs of a static access list of ARP inspection.

Command Syntax

run show arp inspection access-list [<acl-name>]

Parameter

Parameter

Description

<acl-name>

Optional. Specifies access list name. The value is a string.

If you do not specify an access list name, then display all configured access list; if an access list name is specified, then display configuration information of the specific access list.

Example

Display the binding entries of the static access list test1 of ARP inspection.

admin@Xorplus# run show arp inspection access-list test1
Static ACL  IP Address       Mac Address
----------  ---------------  -----------------
Test1       1.1.22.1         00:00:00:00:00:11
            1.1.30.1         00:00:00:00:22:11
Static ACL  Applied Vlans
----------    -------------------
Test1       100  200  300  400 
            500  600  700  800 
            900  4000

Display the binding entries of all the static access lists of ARP inspection.

admin@Xorplus# run show arp inspection access-list
Static ACL  IP Address       Mac Address
----------  ---------------  -----------------
abc         1.1.22.1         00:00:00:00:00:11
            1.1.30.1         00:00:00:00:22:11
bbb         1.1.11.1         00:00:00:22:22:11

Table 1 Description of the run show arp inspection access-list command output

Item	Description
Static ACL	Indicates the access list name.
IP Address	Indicates the IP address in a static ARP binding entry.
Mac Address	Indicates the MAC address in a static ARP binding entry.
Applied Vlans	Indicates the VLANs to which the static access list is applied to.