set interface aggregate-ethernet family ethernet-switching vlan members
This command is to add a vlan member to the trunk lag, vlan members range from 1 to 4094. The default of this command is that packets are tagged when the packets go out from this interface.
Note: If this interface's native-vlan-id is identical to vlan-member, packets will be encapsulated with vlan tag because the " tagged" is the default configuration of vlan-member.
Command Syntax
set interface aggregate-ethernet <lag_name> family ethernet-switching vlan members <vlan-id>
delete interface aggregate-ethernet <lag_name> family ethernet-switching vlan members <vlan-id>
Parameter
• <lag_name> Name of a LAG interface.
• <vlan-id> Configure the VLAN ID or VLAN ID range for which the interface can carry traffic, eg: 2, 3... Range: 1 to 4094.
NOTE:
When configuring VLAN member, use VLAN ID or VLAN range, but NOT other strings.
Example
• This example is adding a trunk LAG port (ae1) to a VLAN:
admin@XorPlus# set interface aggregate-ethernet ae1 family ethernet-switching port-mode trunk admin@XorPlus# set interface aggregate-ethernet ae1 family ethernet-switching vlan members 5 admin@XorPlus# commit
• This example is adding a trunk LAG port (ae1) to a VLAN range:
admin@XorPlus# set interface aggregate-ethernet ae1 family ethernet-switching port-mode trunk admin@XorPlus# set interface aggregate-ethernet ae1 family ethernet-switching vlan members 50-100 admin@XorPlus# commit
• This example is adding a trunk LAG port (ae1) to VLAN 2 and 3:
admin@XorPlus# set interface aggregate-ethernet ae1 family ethernet-switching port-mode trunk admin@XorPlus# set interface aggregate-ethernet ae1 family ethernet-switching vlan members 2,3 admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.