set protocols ospf6 interface dead-interval

Run the command set protocols ospf6 interface dead-interval to configure the OSPF neighbor router dead interval in seconds. This value must be the same on all routers in the OSPF domain.

Run the command delete protocols ospf6 interface dead-interval to remove this configuration and revert to the default value which is 40 seconds.

Command Syntax

set protocols ospf interface <interface-name> dead-interval <1-65535>

delete protocols ospf interface <interface-name> dead-interval 

Parameter

Example

•  Configure the OSPFv3 neighbor dead interval to 60 seconds.

admin@XorPlus# set protocols ospf6 interface vlan200 dead-interval 60
admin@Xorplus# commit