set protocols ospf6 traceoption zebra

Run the command set protocols ospf6 traceoption zebra to configure OSPFv3 zebra module related debugging. Use the arguments send, recv or all to specify debugging for either packets sent, received or both.

Run the command delete protocols ospf6 traceoption zebra to remove this configuration from the switch.

Command Syntax

set protocols ospf6 traceoption zebra <send | recv | all>

delete protocols ospf6 traceoption zebra <send | recv | all>

Example

• This example configures the OSPFv3 zebra module packet debugging for packets received.

admin@XorPlus# set protocols ospf6 traceoption zebra received