set protocols ospf6 router-id

Run the command set protocols ospf6 router-id to configure OSPFv3 router ID. The router ID should be unique within the OSPF domain and is in the IPv4 dotted decimal format. 

Run the command delete protocols ospf route-id to delete this configuration.

Command Syntax

set protocols ospf6 [vrf <vrf-name>] router-id <ipv4>

delete protocols ospf6 [vrf <vrf-name>] router-id <ipv4>

Parameter

Example

•  Configure OSPFv3 router ID.

admin@XorPlus# set protocols ospf6 router-id 1.1.1.1
admin@Xorplus# commit