set protocols ospf6 traceoption neighbor

Run the command set protocols ospf6 traceoption neighbor to enable OSPFv3 neighbor related debugging. The user can choose between state or event related debugging information or can choose all to enable all debugging related to neighbor state change.

Run the command delete protocols ospf6 traceoption neighbor to remove this configuration from the switch.

Command Syntax

set protocols ospf6 traceoption neighbor <state | event | all>

delete protocols ospf6 traceoption neighbor <state | event | all>

Example

• This example enables OSPFv3 neighbor state related debugging.

admin@XorPlus# set protocols ospf6 neighbor state