/
set protocols ospf6 area stub

set protocols ospf6 area stub

Owned by Tracy Yang
May 24, 2024

Run the command set protocols ospf6 area stub to configure a stub area for the OSPFv3 instance. 

Run the command delete protocols ospf6 area stub to delete this configuration from the switch.


Command Syntax

set protocols ospf6 [vrf <vrf-name>] area {<ipv4>|<area-id>} stub

delete protocols ospf6 [vrf <vrf-name>] area {<ipv4>|<area-id>} stub


Parameters

ParameterDescription
vrf <vrf-name>Optional. Specifies the name of the VRF for the OSPFv3 instance.
area {<ipv4>|<area-id>}Specifies the area ID for the OSPFv3 instance. The value is either in IPv4 dotted decimal format or an integer ranging from 0 to 4294967295.

Example

  • This example configures area 1.1.1.1 as a stub area of the OSPFv3 instance in the default VRF.
admin@XorPlus# set protocols ospf6 area 1.1.1.1 stub

Related content

Copyright © 2025 Pica8 Inc. All Rights Reserved.