/
run show bfd

run show bfd

Owned by Tracy Yang
May 24, 2024

The run show bfd command displays informations about BFD.


Command Syntax

run show bfd [vrf <vrf-name>] [interface <interface>] | multihop] peer <peer-ip> [local-address <local-ip>]


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

[interface <interface>] | multihop]

Optional.

  • interface <interface>: Specifies an interface for BGP connection.
  • multihop: Shows informations about a multi-hop BFD session.
peer <peer-ip>Specifies the peer for a BFD session. The value is an IPv4 or IPv6 address.
local-address <local-ip>

Optional. Specifies a local address used to send the packets. The value is an IPv4 or IPv6 address.

Note: This option is mandatory for IPv6.


Example
• Show information about the BFD session.

admin@Xorplus# run show bfd peer 1.1.1.1 
BFD Peer:
        peer 1.1.1.1 local-address 1.1.1.2 vrf default
                ID: 531846395
                Remote ID: 0
                Passive mode
                Status: shutdown
                Diagnostics: ok
                Remote diagnostics: ok
                Peer Type: configured
                Local timers:
                        Detect-multiplier: 2
                        Receive interval: 50ms
                        Transmission interval: 50ms
                        Echo receive interval: disabled
                        Echo transmission interval: 10ms
                Remote timers:
                        Detect-multiplier: 3
                        Receive interval: 1000ms
                        Transmission interval: 1000ms
                        Echo receive interval: disabled	

admin@Xorplus# run show bfd interface vlan3 peer 1.1.1.1
BFD Peer:
        peer 1.1.1.1 local-address 1.1.1.2 vrf default
                ID: 531846395
                Remote ID: 0
                Passive mode
                Status: shutdown
                Diagnostics: ok
                Remote diagnostics: ok
                Peer Type: configured
                Local timers:
                        Detect-multiplier: 2
                        Receive interval: 50ms
                        Transmission interval: 50ms
                        Echo receive interval: disabled
                        Echo transmission interval: 10ms
                Remote timers:
                        Detect-multiplier: 3
                        Receive interval: 1000ms
                        Transmission interval: 1000ms
                        Echo receive interval: disabled


admin@Xorplus# run show bfd interface vlan3 peer 1.1.1.1 local-address 1.1.1.2
BFD Peer:
        peer 1.1.1.1 local-address 1.1.1.2 vrf default
                ID: 531846395
                Remote ID: 0
                Passive mode
                Status: shutdown
                Diagnostics: ok
                Remote diagnostics: ok
                Peer Type: configured
                Local timers:
                        Detect-multiplier: 2
                        Receive interval: 50ms
                        Transmission interval: 50ms
                        Echo receive interval: disabled
                        Echo transmission interval: 10ms
                Remote timers:
                        Detect-multiplier: 3
                        Receive interval: 1000ms
                        Transmission interval: 1000ms
                        Echo receive interval: disabled

admin@Xorplus# run show bfd multihop peer 1.1.1.1
BFD Peer:
        peer 1.1.1.1 multihop local-address 1.1.1.2 vrf default
                ID: 868601837
                Remote ID: 0
                Active mode
                Minimum TTL: 254
                Status: down
                Downtime: 1 hour(s), 52 minute(s), 15 second(s)
                Diagnostics: ok
                Remote diagnostics: ok
                Peer Type: configured
                Local timers:
                        Detect-multiplier: 3
                        Receive interval: 300ms
                        Transmission interval: 300ms
                        Echo receive interval: 50ms
                        Echo transmission interval: disabled
                Remote timers:
                        Detect-multiplier: 3
                        Receive interval: 1000ms
                        Transmission interval: 1000ms
                        Echo receive interval: disabled


admin@Xorplus# run show bfd vrf vrf1 peer 1.1.1.1 
BFD Peer:
        peer 1.1.1.1 local-address 1.1.1.2 vrf vrf1
                ID: 2172419937
                Remote ID: 0
                Passive mode
                Status: shutdown
                Diagnostics: ok
                Remote diagnostics: ok
                Peer Type: configured
                Local timers:
                        Detect-multiplier: 2
                        Receive interval: 50ms
                        Transmission interval: 50ms
                        Echo receive interval: disabled
                        Echo transmission interval: 10ms
                Remote timers:
                        Detect-multiplier: 3
                        Receive interval: 1000ms
                        Transmission interval: 1000ms
                        Echo receive interval: disabled


Related content

Copyright © 2025 Pica8 Inc. All Rights Reserved.