set protocols bfd multihop peer local-address passive-mode
- Tracy Yang
Analytics
The set protocols bfd multihop peer local-address passive-mode command configures the BFD session as passive for a multi-hop BFD session.
The delete protocols bfd multihop peer local-address passive-mode command sets the configuration to the default value.
Command Syntax
set protocols bfd multihop [vrf <vrf-name>] peer<peer-ip> local-address <local-ip> passive-mode
Parameter
Parameter | Description |
vrf <vrf-name> | Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>]. |
| peer <peer-ip> | Specifies the peer for a BFD session. The value is an IPv4 or IPv6 address. |
| local-address <local-ip> | Specifies a local address used to send the packets. The value is an IPv4 or IPv6 address. |
Usage Guidelines
A passive session will not attempt to start the connection and will wait for control packets from peer before it begins replying.
This feature is useful when you have a router that acts as a central node in a star network and you want to avoid all the other nodes sending BFD control packets.
Example
- Configure the BFD session as passive.
admin@Xorplus# set protocols bfd multihop peer 2.2.2.2 local-address 2.2.2.3 passive-mode admin@Xorplus# commit
Related content
Copyright © 2025 Pica8 Inc. All Rights Reserved.