/
set protocols bfd multihop peer local-address shutdown

set protocols bfd multihop peer local-address shutdown

Owned by Tracy Yang
May 24, 2024


The set protocols bfd multihop peer local-address shutdown command can be used to disable the BFD peer. When the peer is disabled an ‘administrative down’ message is sent to the remote peer for a multi-hop BFD session.

The delete protocols bfd multihop peer local-address shutdown command sets the configuration to the default value.


Command Syntax

set protocols bfd multihop [vrf <vrf-name>] peer<peer-ip> local-address <local-ip> shutdown


Parameter

Parameter

Description

vrf <vrf-name>

Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

peer <peer-ip>Specifies the peer for a BFD session. The value is an IPv4 or IPv6 address.
local-address <local-ip>

Specifies a local address used to send the packets. The value is an IPv4 or IPv6 address.


Example

  • Disable the BFD peer.
admin@Xorplus# set protocols bfd multihop peer 2.2.2.2 local-address 2.2.2.3shutdown
admin@Xorplus# commit

Related content

Copyright © 2025 Pica8 Inc. All Rights Reserved.