run show interface gigabit-ethernet egress-buffer

The run show interface gigabit-ethernet egress-buffer command is used to view PFC buffer information of an egress interface, including queue ID, shared ratio and shared threshold.

Command Syntax

run show interface gigabit-ethernet <interface-name> egress-buffer

Parameter

Parameter	Description
interface <interface-name>	Specifies the name of an egress interface with the buffer threshold configured.

Example

View the PFC buffer information of egress interface xe-1/1/3.

admin@PICOS# run show interface gigabit-ethernet xe-1/1/3 egress-buffer
egress_queue_id    shared_ratio    threshold
---------------------------------------------
        0             none       none
        1             none       none
        2             none       none
        3             none       1000
        4             none       none
        5             none       none
        6             none       none