set interface gigabit-ethernet ethernet-switching-options buffer egress-queue threshold

The set interface gigabit-ethernet ethernet-switching-options buffer egress-queue threshold can be used to set the static threshold of shared buffer for a PFC queue on the egress interface.

The delete interface gigabit-ethernet ethernet-switching-options buffer egress-queue threshold command deletes the configuration.

Command Syntax

set interface gigabit-ethernet <interface-name> ethernet-switching-options buffer egress-queue <queue-id> threshold <value>

delete interface gigabit-ethernet <interface-name> ethernet-switching-options [buffer] [egress-queue<queue-id>] [threshold]

Parameter

Parameter	Description
gigabit-ethernet <interface-name>	Specifies the name of a physical interface in the egress direction of the downstream switch.
egress-queue <queue-id>	Specifies the queue number of an egress interface. The value is an integer that ranges from 0 to 7. Note: On Trident and Trident+ based switches, known unicast packets can be assigned to a specific queue between queues from 0 to 7, while unknown unicast packets, multicast packets, and broadcast packets can be assigned to a specific queue between queues from 0 to 3.
threshold <value>	Specifies the static threshold of shared buffer for a PFC queue on the egress interface. When the occupied buffer space exceeds the specified threshold, the packets will be saved in the headroom buffer. The value is an integer that ranges from 1 to 65535. Unit: cell.

Example

Set the static threshold of shared buffer for PFC queue 3 on the egress interface xe-1/1/3 as 2400.

admin@PICOS# set interface gigabit-ethernet xe-1/1/3 ethernet-switching-options buffer egress-queue 3 threshold 2400 
admin@PICOS# commit