run clear class-of-service interface pfc-watchdog manual

The run clear class-of-service interface pfc-watchdog manual command re-enables the PFC watchdog function when the restore mode is set to manual.

Command Syntax

run clear class-of-service interface <interface-name> pfc-watchdog manual

Parameter

Parameter	Description
interface <interface-name>	Specifies the physical port name where PFC watchdog can be enabled. The interface could be a physical port or a member port of a LAG port.

Usage Guidelines

Before configuring this command, you need to execute the set class-of-service interface <interface-name> pfc-watchdog restore-mode manual command to set the PFC deadlock detection recovery mode to manual.

PFC watchdog continuously monitors the PFC activity on the port, once a PFC deadlock occurs, the PFC function on that port will be automatically disabled. Users need to manually execute this command to restore the PFC deadlock detection function. Restoring the PFC deadlock detection function will also allow the PFC function to continue operating.

Example

Re-enable the PFC function when the restore mode is set to manual.

admin@PICOS# run clear class-of-service interface xe-1/1/1 pfc-watchdog manual