run show interface gigabit-ethernet ingress-buffer

The run show interface gigabit-ethernet ingress-buffer command is used to view PFC buffer information of an ingress interface, including queue ID, shared ratio, shared threshold, guaranteed threshold, reset offset and headroom threshold.

Command Syntax

run show interface gigabit-ethernet <interface-name> ingress-buffer

Parameter

Parameter	Description
interface <interface-name>	Specifies the name of an ingress interface with the buffer threshold configured.

Example

View the PFC buffer information of ingress interface xe-1/1/3.

admin@PICOS# run show interface gigabit-ethernet xe-1/1/3 ingress-buffer
ingress_queue_id    shared_ratio    threshold    guaranteed    reset_offset    headroom
---------------------------------------------------------------------------------------
            0        none      none        none            none        none
            1        none        none      none            none        none
            2        none        none      none            none        none
            3        none        none      none            none        none
            4       none        none      none            none        none
            5       none        3000      3400            1000        none
            6       none        none      none            none        none