run clear class-of-service interface pfc-watchdog auto

The run clear class-of-service interface pfc-watchdog auto command re-enables the PFC watchdog function when the restore mode is set to auto.

Command Syntax

run clear class-of-service interface <interface-name> pfc-watchdog auto

Parameter

Parameter	Description
interface <interface-name>	Specifies the physical port name where PFC watchdog can be enabled. The interface could be a physical port or a member port of a LAG port.

Usage Guidelines

Before configuring this command, you need to execute the set class-of-service interface <interface-name> pfc-watchdog restore-mode auto command to set the PFC deadlock detection recovery mode to auto.

If deadlocks repeatedly occur and the count exceeds the configured threshold within the specified time period, the system will automatically disable the PFC function. Users need to manually execute this command to restore the PFC deadlock detection function. Restoring the PFC deadlock detection function will also allow the PFC function to continue operating.

Example

Re-enable the PFC function when the restore mode is set to auto

admin@PICOS#run clear class-of-service interface xe-1/1/1 pfc-watchdog auto