set interface gigabit-ethernet ethernet-switching-options buffer ingress-queue threshold

The set interface gigabit-ethernet ethernet-switching-options buffer ingress-queue threshold can be used to set the static threshold of shared buffer for a PFC queue on the ingress interface.

The delete interface gigabit-ethernet ethernet-switching-options buffer ingress-queue threshold command deletes the configuration.

Command Syntax

set interface gigabit-ethernet <interface-name> ethernet-switching-options buffer ingress-queue <queue-id> threshold <value>

delete interface gigabit-ethernet <interface-name> ethernet-switching-options [buffer] [ingress-queue<queue-id>] [threshold]

Parameter

Parameter	Description
gigabit-ethernet <interface-name>	Specifies the name of a physical interface in the ingress direction of the downstream switch.
ingress-queue <queue-id>	Specifies the queue number of an ingress interface. The value is an integer that ranges from 0 to 7. Note: On Trident and Trident+ based switches, known unicast packets can be assigned to a specific queue between queues from 0 to 7, while unknown unicast packets, multicast packets, and broadcast packets can be assigned to a specific queue between queues from 0 to 3.
threshold <value>	Specifies the static threshold of shared buffer for a PFC queue on the ingress interface. When the occupied buffer space exceeds the specified threshold, the Pause frame will be generated and sent to the egress interface. The value is an integer that ranges from 1 to 65535. Unit: cell.

Example

Set the static threshold of shared buffer for PFC queue 3 on the ingress interface xe-1/1/3 as 2400.

admin@PICOS# set interface gigabit-ethernet xe-1/1/3 ethernet-switching-options buffer ingress-queue 3 threshold 2400 
admin@PICOS# commit