set interface gigabit-ethernet routed-interface name
The set interface gigabit-ethernet routed-interface name command configures the name for the routed interface, which will be referred to in other CLI commands as the routed interface name.
Command Syntax
set interface gigabit-ethernet <interface-name> routed-interface name <string>
Parameter
Parameter | Description |
gigabit-ethernet <interface-name> | Specifies a physical port name. The value is like ge-1/1/1, te-1/1/3, etc. |
name <string> | Specifies the name for the routed interface. The value could be up to 15 alphanumeric characters (including three special characters . – and @). NOTE: To avoid conflict with the preserved interface names, the routed interface name and sub-interface name must start with the string "rif-". Otherwise, commit will fail with the error message "The name of interface must start with "rif-". |
Example
- Configure the name for the routed interface.
admin@Xorplus# set interface gigabit-ethernet te-1/1/4 routed-interface enable true admin@Xorplus# set interface gigabit-ethernet te-1/1/4 routed-interface name rif-te4 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.