run show mpls egress interface

The run show mpls egress interface command shows a list of egress interfaces and the associated parameters information.

Command Syntax

run show mpls egress interface

Parameter

None.

Example

View the Label Switched Path (LSP) table on a MPLS device.

admin@sw2# run show mpls egress interface
MAC address         If-name   Egress-id   Ref-count   Out-label   Label-action   Next-hop
-----------------   -------   ---------   ---------   ---------   ------------   --------
64:9d:99:d2:5a:ff   xe-1/1/2  100012      41          imp-null    SWAP           fe80::669d:9920:3d2:5aff
64:9d:99:d2:5a:ff   xe-1/1/2  100008      3           -           NULL           -        
64:9d:99:d2:5a:ff   xe-1/1/2  100016      5           imp-null    SWAP           fe80::669d:9920:8d2:5aff
64:9d:99:d2:5a:ff   xe-1/1/2  100022      1           23          SWAP           fe80::669d:9920:8d2:5aff
64:9d:99:d2:5a:ff   xe-1/1/2  100009      2           23          PUSH           fe80::669d:9920:8d2:5aff
c0:b8:e6:74:34:e9   xe-1/1/3  100013      25          imp-null    SWAP           fe80::c2b8:e620:174:34e9
c0:b8:e6:74:34:e9   xe-1/1/3  100015      6           imp-null    SWAP           fe80::c2b8:e620:174:34e9
c0:b8:e6:74:34:e9   xe-1/1/3  100020      0           20          SWAP           fe80::c2b8:e620:174:34e9
c0:b8:e6:74:34:e9   xe-1/1/3  100007      3           -           NULL           -        
c0:b8:e6:74:34:e9   xe-1/1/1  100010      3           -           NULL           -        
c0:b8:e6:74:34:e9   xe-1/1/1  100018      2           imp-null    SWAP           fe80::c2b8:e620:374:34e9