run show mpls interface

The run show mpls interface command is used to view the label information per interface that enables MPLS.

Command Syntax

run show mpls interface [outlabel <outlabel>]

Parameter

Parameter	Description

Parameter	Description
outlabel <outlabel>	Optional. Specifies the MPLS out label.

Example

View the label information per interface that enables MPLS.

admin@sw2# run show mpls interface
Interface     If-id    Out-label   Ref-count
---------     ------   ---------   ---------
vlan10        8205     3           6
vlan20        8202     3           2
vlan30        8203     3           2
vlan30        8197     23          1
vlan30        8201     23          1
 

admin@sw2# run show mpls interface outlabel 23
Interface     If-id    Out-label   Ref-count
---------     ------   ---------   ---------
vlan30        8197     23          1
vlan30        8201     23          1