run show mpls ldp discovery

The run show mpls ldp discovery command is used to view Discovery Hello Information. The detail option can be used to show details of Discovery Hello Information.

Command Syntax

run show mpls ldp [ipv4|ipv6] discovery [detail]

Parameter

Parameter	Description

Parameter	Description
[ipv4\|ipv6]	Optional. Specifies the IP address family type.

Example

View Discovery Hello Information.

admin@sw3# run show mpls ldp discovery
AF   ID              Type     Source           Holdtime
ipv6 2.2.2.2         Link     vlan30                 15
ipv6 4.4.4.4         Link     vlan10                 15
ipv6 5.5.5.5         Link     vlan20                 15


admin@sw3# run show mpls ldp discovery detail
Local:
  LSR Id: 3.3.3.3:0
  Transport Address (IPv6): 3::3
Discovery Sources:
  Interfaces:
    vlan10:
      LSR Id: 4.4.4.4:0
          Source address: fe80::6a21:5f20:1a7:7163
          Transport address: 4::4
          Hello hold time: 15 secs (due in 13 secs)
          Dual-stack capability TLV: no
    vlan20:
      LSR Id: 5.5.5.5:0
          Source address: fe80::c2b8:e620:274:34e9
          Transport address: 5::5
          Hello hold time: 15 secs (due in 13 secs)
          Dual-stack capability TLV: no
    vlan30:
      LSR Id: 2.2.2.2:0
          Source address: fe80::1eea:b20:cff:fcb9
          Transport address: 2::2
          Hello hold time: 15 secs (due in 13 secs)
          Dual-stack capability TLV: no
  Targeted Hellos: