run show mpls label
- Tracy Yang
Owned by Tracy Yang
Nov 18, 2024
1 min read
Loading data...
The run show mpls label command shows the list of routes that reference MPLS label.
Command Syntax
run show mpls label <label>
Parameter
Parameter | Description |
|---|---|
label <label> | Specifies the MPLS label.The value is an integer. |
Example
View the Label Switched Path (LSP) table on a MPLS device.
admin@sw2# run show mpls label 23
Route-List:
4::4/128Copyright © 2024 Pica8 Inc. All Rights Reserved.