set protocols mpls ldp targeted-neighbor

Owned by Tracy Yang
Nov 18, 2024
1 min read

The set protocols mpls ldp targeted-neighbor command configures sending Targeted Hello messages to specified peers to establish LDP sessions proactively, allowing responses to Targeted Hello messages from specified peers.

The delete protocols mpls ldp targeted-neighbor command deletes the configuration.

 

Command Syntax

set protocols mpls ldp {ipv4-family|ipv6-family} targeted-neighbor <ip-address>

delete protocols mpls ldp {ipv4-family|ipv6-family} targeted-neighbor

 

Parameter

Parameter

Description

{ipv4-family|ipv6-family}

Required. Specifies the IP address family type.

targeted-neighbor <ip-address>

Specifies the Targeted peer IP. The value is an IPv4/IPv6 address.

 

Example

  • Configure sending Targeted Hello messages to specified peers to establish LDP sessions proactively.

admin@PICOS# set protocols mpls ldp ipv4-family targeted-neighbor 2.2.2.2 admin@PICOS# commit

Copyright © 2024 Pica8 Inc. All Rights Reserved.