/
run show mpls status
run show mpls status
The run show mpls status command shows whether MPLS is enabled on the device.
Command Syntax
run show mpls status
Parameter
None.
Example
View whether MPLS is enabled on the device.
admin@sw3# run show mpls status
MPLS support enabled: yes
, multiple selections available,
Related content
run show mpls interface
run show mpls interface
More like this
run show mpls fec
run show mpls fec
More like this
run show mpls label
run show mpls label
More like this
run show mpls ldp interface
run show mpls ldp interface
More like this
Copyright © 2025 Pica8 Inc. All Rights Reserved.