set protocols mpls ldp label-local-allocate

The set protocols mpls ldp label-local-allocate command configures the triggering conditions for allocating labels under the address family. The host-routes option allocates labels for host routes only (/32 or /128). If host-routes option is not specified, or this command is not configured, the LSR allocates labels for all the routes.

The delete protocols mpls ldp label-local-allocate command deletes the configuration.

Command Syntax

set protocols mpls ldp {ipv4-family|ipv6-family} label-local-allocate [host-routes]

delete protocols mpls ldp {ipv4-family|ipv6-family} label-local-allocate

Parameter

Example

• The following command allocates labels for host routes only (/32).