run show mpls ldp interface

The run show mpls ldp interface command is used to view interface information that enables LDP.

Command Syntax

run show mpls ldp [ipv4|ipv6] interface

Parameter

Parameter	Description

Parameter	Description
[ipv4\|ipv6]	Optional. Specifies the IP address family type.

Example

View interface information that enables LDP.

admin@sw3# run show mpls ldp interface
AF   Interface   State  Uptime   Hello Timers  ac
ipv6 vlan10      ACTIVE 2d23h56m 5/15           1
ipv6 vlan20      ACTIVE 2d23h56m 5/15           1
ipv6 vlan30      ACTIVE 2d23h56m 5/15           1
ipv6 vlan40      DOWN   00:00:00 5/15           0


admin@sw3# run show mpls ldp ipv6 interface
AF   Interface   State  Uptime   Hello Timers  ac
ipv6 vlan10      ACTIVE 2d23h56m 5/15           1
ipv6 vlan20      ACTIVE 2d23h56m 5/15           1
ipv6 vlan30      ACTIVE 2d23h56m 5/15           1
ipv6 vlan40      DOWN   00:00:00 5/15           0