run show mpls table

The run show mpls table command shows the Label Switched Path (LSP) table on a MPLS device.

Command Syntax

run show mpls table [<in-label>]

Parameter

Parameter	Description

Parameter	Description
[<in-label>]	Optional. Specifies the MPLS label used when a packet enters the device.The value is an integer.

Example

View the Label Switched Path (LSP) table on a MPLS device.

admin@sw2# run show mpls table
Inbound Label  Type  Nexthop                   Outbound Label
 ---------------------------------------------------------------
 17             LDP   fe80::669d:9920:8d2:5aff  23
 18             LDP   fe80::c2b8:e620:374:34e9  implicit-null
 18             LDP   fe80::c2b8:e620:174:34e9  implicit-null
 20             LDP   fe80::669d:9920:8d2:5aff  implicit-null
 21             LDP   fe80::c2b8:e620:374:34e9  implicit-null
 21             LDP   fe80::c2b8:e620:174:34e9  implicit-null
 21             LDP   fe80::669d:9920:8d2:5aff  implicit-null
 41             LDP   fe80::669d:9920:8d2:5aff  implicit-null
 
 
admin@sw2# run show mpls table 21
Local label: 21 (installed)
 type: LDP remote label: 3 distance: 150
  via fe80::c2b8:e620:374:34e9 dev vlan20 (installed)
 type: LDP remote label: 3 distance: 150
  via fe80::c2b8:e620:174:34e9 dev vlan10 (installed)
 type: LDP remote label: 3 distance: 150
  via fe80::669d:9920:8d2:5aff dev vlan30 (installed)