set protocols arp inspection vlan access-list
- Tracy Yang (Unlicensed)
The set protocols arp inspection vlan access-list command applies an ARP inspection access list to a VLAN.
Command Syntax
set protocols arp inspection vlan <vlan-id> access-list <acl-name>
Parameters
Parameter | Description |
vlan <vlan-id> | Specifies a VLAN ID. The value is an integer that ranges from 1 to 4094. |
access-list <acl-name> | Specifies an access list name. The value is a string. |
Usage Guidelines
A VLAN can be configured with multiple access-lists, and the system will check through the access-lists of the VLAN to match an ARP entry upon receiving an ARP packet. If no ARP entry is matched, the ARP packet will be dropped.
NOTE:
Configure the access-list first and then apply to a VLAN, otherwise it will prompt access-list does not exist when committing this command.
Example
- Apply the ARP inspection access list test1 to VLAN 100.
admin@Xorplus# set protocols arp inspection vlan 100 access-list test1 admin@Xorplus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.