set protocols snmp v3 enable
The set protocols snmp v3 enable command can be used to enable or disable SNMPv3. The default version of the SNMP is v2.
Command Syntax
set protocols snmp v3 enable  <boolean>
ParameterÂ
Parameter | Description |
enable  <boolean> | Enable or disable SNMPv3. The value could be true or false.
The default version of the SNMP is v2. |
           Â
Example
 •This example enables SNMPv3.
admin@XorPlus# set protocols snmp v3 enable true admin@XorPlus# commit
Copyright © 2024 Pica8 Inc. All Rights Reserved.