/
run show pim mfc

run show pim mfc

Owned by Tracy Yang (Unlicensed)
Mar 16, 2021

The run show pim mfc command shows information about PIM multicast forwarding entries.


Command Syntax

run show pim mfc


Parameter

None.


Example

  • Show information about PIM multicast forwarding entries.
admin@Xorplus# run show pim mfc
Group           Source          RP            
-------------   -------------   ------------- 
225.0.0.1       200.0.0.2       2.2.2.2       
    Incoming interface :      vlan20
    Outgoing interfaces:      vlan100
225.0.0.1       200.0.0.3       2.2.2.2       
    Incoming interface :      vlan60
    Outgoing interfaces:      vlan100   

Table 1 Description of the run show pim mfc command output

Item

Description

Group

Multicast group address.

Source

Source of multicast group.

RP

RP address.

Incoming interface

Interface that is used to receive multicast data stream.

Outgoing interfaces

Interface that is used to transmit multicast data stream.

Related content

Copyright © 2025 Pica8 Inc. All Rights Reserved.