/
run show pim neighbors
run show pim neighbors
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Mar 16, 2021
Loading data...
The run show pim neighbors command shows information about PIM neighbors.
Command Syntax
run show pim neighbors
Parameter
None.
Example
- Show information about PIM neighbors.
admin@Xorplus# run show pim neighbors Interface DRpriority NeighborAddr V Mode Holdtime Timeout ---------- ---------- ------------- - ---- -------- ------- vlan20 1 20.0.0.2 2 Sparse 105 84 vlan60 1 60.0.0.3 2 Sparse 105 83
Table 1 Description of the run show pim neighbors command output
Item | Description |
Interface | Indicates interfaces that enabled PIM-SM. |
DRpriority | Indicates DR priority. |
NeighborAddr | Indicates the neighbor address. |
V | Indicates the version of PIM protocol. Currently the only PIM version 2 is supported. |
Mode | Indicates that mode of the PIM protocol, Sparse or Dense. Currently the only Sparse mode is supported. |
Holdtime | Holdtime of the PIM neighbor. |
Timeout | Amount of time left before a PIM relationship times out. |
Copyright © 2025 Pica8 Inc. All Rights Reserved.