run show pim traffic

The run show pim traffic command shows the traffic statistic information about the PIM multicast group.

run clear pim traffic command is used to clear the traffic statistic information about the PIM multicast group.

Command Syntax

run show pim traffic

Parameter

None.

Example

Show the traffic statistic information about the pim multicast group.

admin@Xorplus# run show pim traffic
PIM Traffic Counters
                          Received                Sent
Hello                          172                 118
Join-Prune                      27                  30
Graft                            0                   0
Graft Ack.                       0                   0
Data Register                    0                   0
Register Stop                    0                   0
Assert                           2                  10
BSR Message                      0                   0
Candidate-RP Adv.                0                   0
 
Errors:
Malformed Packets                                    0
Bad Checksums                                        0
Packets received on PIM-disabled Interface           0
Packets received with Unknown PIM Version            0
Packets received with Unknown PIM Type               0
Packets received from Unknown PIM Neighbor           1