/
run show pim rps

run show pim rps

Owned by Tracy Yang (Unlicensed)
Mar 16, 2021

The run show pim rps command shows information about the RPs at a PIM router.


Command Syntax

run show pim rps


Parameter

None.


Example

  • Show information about the RPs at a PIM router.
admin@Xorplus# run show pim rps
Group           RP              Type      Pri   Holdtime   Timeout 
-------------   -------------   -------   ---   --------   ------- 
225.0.0.1       2.2.2.2         bootstrap 192   150        90    

Table 1 Description of the run show pim rps command output

Item

Description

Group

Multicast group address.

RP

RP address.

Type

Indicates that RP type, the value could be static or boostrap, where bootstrap indicates a dynamic RP.

Pri

Priority of the RP.

Holdtime

Holdtime of the RP.

Timeout

Amount of time left before a PIM relationship times out with RP.

Related content

Copyright © 2025 Pica8 Inc. All Rights Reserved.