run show pim rps mapping

The run show pim rps mapping command shows the mapping relations between the RP and the multicast group.

Command Syntax

run show pim rps mapping

Parameter

None.

Example

Show the mapping relations between the RP and the multicast group.

admin@Xorplus# run show pim rps mapping
RP              Type      Pri   Holdtime   Timeout   ActiveGroups   GroupPrefix      
-------------   -------   ---   --------   -------   ------------   ---------------- 
2.2.2.2         bootstrap 192   150        136       1              225.0.0.0/8      
2.2.2.2         bootstrap 192   150        136       0              239.0.0.0/8

Table 1 Description of the run show pim rps mapping command output

Item	Description
RP	RP address.
Type	Indicates that RP type, the value could be static or boostrap, where bootstrap indicates a dynamic RP.
Pri	Priority of the RP.
Holdtime	Holdtime of the RP.
Timeout	Amount of time left before a PIM relationship times out with RP.
ActiveGroups	The number of active multicast groups.
GroupPrefix	Multicast group address.