set protocols pimsm4 switch-to-spt-threshold disable
- Tracy Yang (Unlicensed)
The set protocols pimsm4 switch-to-spt-threshold disable command is used to enable or disable the SPT switchover function.
Command Syntax
set protocols pimsm4 switch-to-spt-threshold disable <true | false>
Parameter
Parameter | Description |
disable <true | false> | Enables or disables the SPT switchover function. The value could be true or false.
The default is false. |
Usage Guidelines
When SPT switchover function is enabled, the receiver-side DR initiates SPT switchover to the source when receiving the first multicast packet. Further operation after SPT switchover function is enabled: you can also use set protocols pimsm4 switch-to-spt-threshold bytes and set protocols pimsm4 switch-to-spt-threshold interval commands to set the rate threshold of the multicast packets in a measurement interval to initiate SPT switchover.
Example
- Enable the SPT switchover function.
admin@Xorplus# set protocols pimsm4 switch-to-spt-threshold disable false admin@Xorplus# commit
Copyright © 2025 Pica8 Inc. All Rights Reserved.