/
protocols bgp route-reflector cluster-id
protocols bgp route-reflector cluster-id
- Tracy Yang (Unlicensed)
Owned by Tracy Yang (Unlicensed)
Mar 16, 2021
Loading data...
A cluster ID can help prevent routing loops between multiple RRs within a cluster, and between clusters. When a cluster has multiple RRs, the same cluster ID must be configured for all RRs within the cluster.
Command Syntax
set protocols bgp route-reflector cluster-id <IPv4>
delete protocols bgp route-reflector cluster-id
Parameter
•<IPv4>CLUSTER_ID for this route reflector
Example
• This example is to set cluster_id for route-reflector:
admin@XorPlus# set protocols bgp route-reflector cluster-id 16.16.16.16 admin@XorPlus# commit
Copyright © 2025 Pica8 Inc. All Rights Reserved.