/
set protocols ospf4 area virtual-link retransmit-interval

set protocols ospf4 area virtual-link retransmit-interval

Owned by Tracy Yang (Unlicensed)
Mar 16, 2021

Users can configure the interval time of virtual link OSPF interface retransmitting the OSPF route.


Command Syntax
set protocols ospf4  vrf <vrf-name> area <area-id> virtual-link <router-id> retransmit-interval <time>


Parameter

•<vrf-name> Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

• <area-id>  The OSPF area to which the attached network belongs.
• <router-id>  A unique 32-bit identifier within this AS.
• <time>  The retransmit interval range 1-65535.


Example
• This example configurethe interval time 20 seconds of virtual link OSPF interface retransmitting the OSPF route.

admin@XorPlus# set protocols ospf4 area 0.0.0.0 virtual-link 4.4.4.4 retransmit-interval 20
admin@XorPlus# commit

Copyright © 2025 Pica8 Inc. All Rights Reserved.