/
set protocols ospf4 area virtual-link authentication md5 password

set protocols ospf4 area virtual-link authentication md5 password

Owned by Tracy Yang (Unlicensed)
Mar 16, 2021

User can configure the password of virtual link OSPF interface md5 ID authentication.


Command Syntax
set protocols ospf4 vrf <vrf-name> area <area-id> virtual-link <router-id> authentication md5 <int> password <pw>


Parameter

• <vrf-name> Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

• <area-id> The OSPF area to which the attached network belongs.
• <router-id> A unique 32-bit identifier within this AS.
• <int>  The MD5 authentication key ID range 0-255
• <pw>  Authentication password


Example
• This example configure the password of the virtual link OSPF interface md5 key ID authentication

admin@XorPlus# set protocols ospf4 area 0.0.0.0 virtual-link 4.4.4.4 authentication md5 23 password pica8
admin@XorPlus# commit

Copyright © 2025 Pica8 Inc. All Rights Reserved.