/
set protocols ospf4 area virtual-link transmit-delay

set protocols ospf4 area virtual-link transmit-delay

Owned by Tracy Yang (Unlicensed)
Mar 16, 2021

User can configurethe time to transmit an LSA on this address of the virtual link OSPF interface.


Command Syntax
set protocols ospf4 vrf <vrf-name> area <area-id> virtual-link <router-id> transmit-delay <time>


Parameter

• <vrf-name> Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

• <area-id>  The OSPF area to which the attached network belongs.
• <router-id>  A unique 32-bit identifier within this AS.
• <time>  The extra addition to age field of all transmitted LSAs range 1-3600.


Example
• This example configurethe time 2 seconds to transmit an LSA on this address of the virtual link OSPF interface.

admin@XorPlus# set protocols ospf4 area 0.0.0.0 virtual-link 4.4.4.4 transmit-delay 2
admin@XorPlus# commit

Copyright © 2025 Pica8 Inc. All Rights Reserved.