set protocols ospf4 area virtual-link authentication md5 simple-password
- Tracy Yang (Unlicensed)
Users can configure the simple password key of virtual link OSPF interface md5 ID authentication.
Command Syntax
set protocols ospf4 vrf <vrf-name> area <area-id> virtual-link <router-id> authentication md5 <int> simple-password <pd>
Parameter
• <vrf-name> Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].
Note that: The configuration is in the default VRF if not explicitly bound to any VRF.
• <area-id> The OSPF area to which the attached network belongs.
• <router-id> A unique 32-bit identifier within this AS.
• <int> The MD5 authentication key ID range 0-255
• <pd> Simple password authentication key.
Example
• This example configure the simple password key of the virtual link OSPF interface md5 key ID authentication
admin@XorPlus# set protocols ospf4 area 0.0.0.0 virtual-link 4.4.4.4 authentication md5 23 simple-password pica8 admin@XorPlus# commit
Copyright © 2025 Pica8 Inc. All Rights Reserved.