/
set protocols ospf4 area virtual-link authentication md5 start-time

set protocols ospf4 area virtual-link authentication md5 start-time

Owned by Tracy Yang (Unlicensed)
Mar 16, 2021

Users can configure the start time of virtual link OSPF interface md5 ID authentication.


Command Syntax
set protocols ospf4 vrf <vrf-name> area <area-id> virtual-link <router-id> authentication md5 <int> start-time <time>


Parameter

• <vrf-name> Optional. Specifies a VRF name. The value is a string. It’s a user-defined VRF set by the command set ip vrf <vrf-name> [description <string>].

Note that: The configuration is in the default VRF if not explicitly bound to any VRF.

• <area-id>  The OSPF area to which the attached network belongs.
• <router-id>  A unique 32-bit identifier within this AS.
• <int>  The MD5 authentication key ID range 0-255
• <time>   Authentication start time (YYYY-MM-DD.HH:MM)


Example
• This example configure the start time of the virtual link OSPF interface md5 key ID authentication

admin@XorPlus# set protocols ospf4 area 0.0.0.0 virtual-link 4.4.4.4 authentication md5 23 start-time 2014-3-20.23:21
admin@XorPlus# commit

Copyright © 2025 Pica8 Inc. All Rights Reserved.