protocols rip interface vif address passive

To prevent a interface IP address from sending RIP packets, use the set protocols rip interface vif address passive in L2/L3 configuration mode.

set protocols rip interface interface-name vif vif-name address ip-address passive { true | false }

interface-name	Interface name.
vif-name	L3 interface name.
ip-address	Interface IP address used for RIP.

The following example prevents RIP packets from being sent:

admin@Switch# set protocols rip interface vlan10 vif vlan10 address 10.1.1.1 passive true

PICOS-3.8_Configuration_Guide